NF70 Instructions book

INSTRUCTIONS BOOK OF END HOT WROUGHT IRON MACHINE NF70

Machine Identification​

  • Trademark: Nargesa
  • Type: End Hot Wrought Iron Machine Nargesa NF70
  • Model: NF70

PDF Instructions book of the End Hot Wrought Iron Machine Nargesa NF70 

End Hot Wrought Iron Machine Nargesa NF70

Description of the End Hot Wrought Iron Machine Nargesa NF70

The purpose of the machine NF70 NARGESA is to shape up hot metal (forging) to the desired shape by mechanical deformation. The final result of the part is given by the different forming rollers. 

PDF Instructions book of the End Hot Wrought Iron Machine Nargesa NF70 

End Hot Wrought Iron Machine Nargesa NF70


CONTENT OF INSTRUCTIONS BOOK

1. CHARACTERISTICS OF THE END HOT WROUGHT IRON MACHINE NF70
1.1. General features

2. TRANSPORTATION AND STORAGE
2.1. Transportation
2.2. Storage conditions

3. INSTALLMENT AND STARTINGUP
3.1. Location of the machine
3.2. Working site
3.3. Admissible outer conditions
3.4. Electric connections

4. TOOLING
4.1. Standard tooling
4.2. Optional tooling


1. CHARACTERISTICS OF THE END HOT WROUGHT IRON MACHINE NF70

1.1. General features

Electric motor 5.5 KW power (7.5 HP) to 1460 r.p.m.

Tension Power 230 or 400 V three-phase

Electrical consumption 22/12 A

Working speed 20 rpm at 50 Hz

Weight 450 Kg

Maximum capacity Mild steel square of 20x20mm

Mild steel flat bar of 40x10mm


2. TRANSPORTATION AND STORAGE

2.1. Transportation

Transportation of the machine is made by a forklift or by shovel, by using the clamping point of the lower base machine (designed for this purpose). 

2.2. Storage conditions

* Relative humidity between 30% and 95% non-condensing.
* Temperature 15 º C and 55 º C.
* Do not stack anything on the machine.
* Do not disassemble the machine for storage.


3. INSTALLMENT AND STARTINGUP

3.1. Location of the machine

The NF70 NARGESA machine will be positioned on a flat surface so it can be leveled. If desired, it can be clamped to the ground through the holes made in the base for this purpose.

3.2. Working site

To use the forging machine NARGESA NF70 is essential to have enough space to work on the side of it and also have access to the back to carry out the maintenance of the machine.

3.3. Admissible outer conditions

The working conditions of the machine NF70 NARGESA ranges between +5 º C and +50 º C and the maximum continuous temperature +45 ° C (24 hours)
The condition of humidity ranges between 30% and 90% non-condensing.

3.4. Electric connections

The machine NARGESA NF70 is designed to be connected to an outlet of a three-phase 230 or 400V 50/60Hz


4. TOOLING

4.1. Standard tooling

Set of flat rollers​

Set of flat rollers to make flat and piramidal extremes. 

Set of striated rollers

Set of striated rollers to get fishtail shaped ends.

4.2. Optional tooling 

Set of trilobular rollers

Set of trilobular rollers to emboss decoration in the middle of a baluster.

 Set of triple middle marking rollers 

Set of excentric rollers to emboss the middle of balusters. Triple design, flat, striped and discontiuous in the same roller. 

Set of fishtail roller 

Two-grooved roller, one for big diameters and the other one for smaller diameters. 

Set of special rollers 

We design and manufacture all kind of special rollers under request.

Join to our Newsletter

Be part of our Nargesa Community and get all information of the branch, demo clips, campaigns in Machinery…